The C 42 MT (Mill/Turn) machining center from the high-performance-line makes for an effective entry into MT technology and it becomes a high-performance milling and turning center. This includes various applications in the tool and mould making, medical, aerospace, motorsport, racing machine sectors and other industries. The C 42 U MT machining center is at home in every area.

The C 42 U MT responds to demands for highest precision and very small tolerances through its workpiece-dimension-optimised traverse paths and thought-through 5-axis usage. You can discover more details about the C 42 U MT via the i-buttons in the 360-degree view.

Hermle C 42 MT (Mill/Turn) Turning technology

The slimline tool spindles are constructed in two parts and can be replaced easily and quickly during servicing. Thanks to low interfering edges and collision protection by compression sleeves, safety is given primary importance by maximum collision avoidance. Damage can be prevented in 50% of collisions.

The 5-axis machining center C 42 MT GEN2 from the high-performance mill-turn series is equipped for the first time with the SIEMENS SINUMERIK ONE control, the C 42 MT is used to machine a technology component into which a wide variety of turning technologies have been integrated.

These “turning cycles” in detail: Bright turning, eccentric turning, taper turning, out-of-round turning of a polygon contour, contour broaching of any 2D contour, simultaneous turning of the inner contour, thread turning, recess turning, power skiving, QR code drilling.

Other machines on display at EMO 2025
The 5-axis machining center C 12 GEN2 from the high-performance series with the robot system RS 05-2. The robot system RS 05-2 handles workpieces weighing up to 10kg while at the same time storing a large number of individual parts in a wide variety of storage modules. An aluminium medal is being machined which can also be used as a PIN magnet.

The 5-axis machining center C 32 GEN2 from the high-performance series with the robot system RS 2 GEN2. Hermle AG is now taking automation to a new level with the GEN2 version of the robot system RS 2. Almost all components of the previous RS 2 system have been enhanced and optimised to meet customer requirements. A detailed press release on the robot system RS 2 GEN2: PI13052025.

The 5-axis machining center C 400 GEN2 from the performance series with the handling system HS flex hybrid. With the handling system HS flex hybrid, Hermle is taking the previous handling system HS flex to the next level of performance for the economic production of components weighing up to 450 kg. The system transports both pallets and vises from the setup station to the storage modules or the working area. The following components have all been specially configured for the HS flex hybrid – storage modules, setup station, gripper and adapter pallet. Further, the HS flex hybrid can be adapted to six different machine models and configured with either one or two storage modules.

For further details contact Top-Tool on 076 511 3066 or visit www.top-tool.co.za