Tungaloy is expanding its TFE series of face milling cutters for finishing applications to include bodies with adjustable insert pockets.

Tungaloy is expanding its TFE series of face milling cutters for finishing applications to include bodies with adjustable insert pockets. The cutters are said to help achieve near-zero axial runout for good surface finishing results.

The screw and wedge located beneath each insert pocket are used to axially adjust the insert heights to a tolerance of ±0.065mm. This is said to improve surface quality on the workpieces and insure uniform wear progression on all the inserts in the cutter, facilitating insert life management.

The adjustable cutters use existing TFE inserts which are available in a range of grades and geometries for a variety of materials and applications, including the AH120 coated carbide grade for steel and cast iron; AH140 for stainless steel; DS1100 with chipbreakers for non-ferrous materials; NS740 cermet grade for steel; uncoated KS05F grade for non-ferrous applications; and DX140, a PCD-tipped format serving as a nonferrous, high-parameter solution.

The standard cutter bodies are available in the bore (shell-mill) style only, with outer diameters of 80mm, 100mm and 125mm. Specials are available upon request.

For further information contact Star Tooling on TEL: 011 818 2250 or visit www.startooling.co.za