The EX‑Trabeam PRO from Thermacut is a new solid-state laser cutting head with an autofocus function, which is intended to improve penetration into the material. The cutting head is suitable for use with modern, high-performance laser cutting machines equipped with a solid-state beam source operating in the wavelength range of 1 030nm to 1130nm and with a maximum power output of 8 kW. The EX‑Trabeam PRO works with a collimating focal length of 100mm and focused focal lengths of 125mm, 150mm, 175mm or 200mm. The cutting gas pressure is 25 bar at maximum.

EX‑Trabeam PRO cutting heads have a level of mechanical sealing, including ‘Smart Protection’ seal monitoring to protect the optical components. Thanks to the front-operated beam adjustment, the horizontal adjustment is designed to be easy and precise. Compared to other commercially available systems, the capacitive sensing of the EX‑Trabeam PRO is not susceptible to temperature drifts. Thus, according to Thermacut, this new laser cutting head allows precise distance measurements even at high beam power.

Auto focus cutting head
The optimised laser cutting head with autofocus function is for a better piercing process. The cutting head EX-Trabeam PRO is suitable for modern, powerful laser cutting machines equipped with a solid-state beam source, which operate in a wavelength range of 1 030nm to 1 130nm and a power of up to 8kW.

Focal length
EX-Trabeam PRO operates with a collimating focal length of 100mm as well as focused focal lengths of 125mm, 150mm, 175mm or 200mm with a cutting gas pressure up to a maximum of 25 bar.

For further details contact Torch Tech on TEL: 010 007 0476 or visit www.torchtech.co.za