These TOR-6-MILL cutters are available in the following configurations: TR6 ER endmills in a diameter range of 16mm to 32mm; TR6 ER-M interchangeable milling heads with Flexfit adaptation in a diameter range of 16mm to 35mm and; TR6 FR face mills in 52mm, 66mm and 80mm diameters.
The tool diameter does not change for all insert corner radii and its design enables undercutting. Coolant holes are directed to each and every cutting edge, while the cutter body has a special protective polished coating for uninterrupted chip flow and protection from corrosion and wear.
The inserts are available in four cutting geometries to enable optimal machining of different applications and include: The TR6 TNCU/MU 1004 double sided insert with six round cutting edges, available in 0.5mm to 3mm corner radii and featuring six cutting edges and a positive rake angle, providing excellent surface finish; TR90 TXMT 1004 single sided insert with three cutting edges for 90° shoulder and face milling, featuring a 0.8mm corner radius and 4mm maximum depth of cut; TR45 TXMT 1004 single sided insert with three 45°cutting edges for general use and for face and chamfer milling, with a 3mm maximum depth of cut; TRFF TXMT 1004 single-sided insert with three cutting edges for fast feed machining, 17˚ cutting edge angle and three cutting edges with a 0.8mm maximum depth of cut, ramping down capability and a 1.4mm radius for programming; TR6 TNCU/MU 0702 double sided ground insert with six cutting edges and a positive rake angle, available with 0.5mm, 1mm and 1.5mm corner radii, TR90 TXMT 0702 single sided insert with three cutting edges for 90° shoulder milling, 0.4mm corner radius and 2.5mm maximum depth of cut and; TRFF TXMT 0702 single-sided insert with three cutting edges for high feed machining, 18˚ cutting edge angle and three cutting edges with a 0.6mm maximum depth of cut, ramping down capability and a 1mm radius for programming.
The TOR-6-MILL inserts are produced from Iscar’s latest Sumotec carbide grades to ensure high productivity.
For further details contact Iscar South Africa on TEL: 011 997 2700 or visit www.iscar.com
