DMG MORI’s DMP 70 dynamic production machine

DMG MORI’s DMP 70 is a compact production machine with a footprint of 4.2m² and is ideal for medical technology applications, job shop, aerospace, and more.

As the successor of the successful Milltap 700 the new DMG MORI DMP 70 stands for maximum productivity on the smallest space. With a footprint of just 4.2 m² it is around 10 per cent smaller than the Milltap 700. DMG MORI has designed the compact production machine for applications in medical technology, job shop as well as the aerospace sector and other demanding industries. Travel paths of 700mm x 420mm x 380mm and the optional integrated swivel/rotary table enables 5-axis simultaneous machining of a wide range of components. Automation solutions such as the workpiece handling WH 3 Cell can be connected flexibly from the right or left. Connection from the front is also possible.

An end-to-end optimisation of the machine concept has made the DMP 70 an extremely rigid production machine with a metal removal rate that is 10 per cent higher than the Milltap 700. A wide grey cast iron machine bed, enlarged installation footprint and 35mm linear guideways constitute the basis for the quality-oriented and up to 30 per cent faster machining of demanding workpieces. Additional stability has been achieved through the high-strength spindle – thanks to higher spring preload – and the sturdy tool magazine with metal clips.

With rapid traverses of 60m/min and an acceleration of up to 2g the DMP 70 offers maximum dynamics. In its standard version the DMP 70 is equipped with an inline spindle with a speed of 10 000rpm and 78Nm torque. Its fast tool change and chip-to-chip times of 1.5 seconds also play their part in ensuring the high level of productivity. The optimally accessible tool magazine has space for up to 15 tools with lengths up to 250mm. 25 tool pockets are possible as an option.

Innovative step forward through 3D control technology
Where control is concerned the DMP 70 has a SLIMline multi-touch control with Siemens Operate 4.8. The 19” display is easy to use and thanks to its high resolution provides a perfect overview. The 3D control technology enables users to simulate machining in advance.

For more information contact Retecon Machine Tools on TEL: 011 976 8600 or visit