The Yimeng VT-350-5X is a 5-axis machining center featuring 5-axis simultaneous machining, making the machine ideal for complicated parts machining with a single setup. And it’s affordable.
The optimised structure design and robust column and base ensure outstanding stability during machining. The machine has linear motion guides on the XYZ axis. The rapid traverse rates on XYZ axis reach 48m/min.
The base structure is reinforced by internal ribbing to achieve high rigidity and no deformation during machining.
The Yimeng VT-350-5X has an X-axis travel of 350mm, Y-axis travel of 270mm and a Z-axis travel of 300mm. The table size is 400mm x 250mm, the spindle speed is 12 000rpm with a maximum spindle power of 3.7/5.5kW and a spindle taper of BT30.
The Yimeng 5-axis vertical machining center is equipped with a Syntec 200 series controller, providing high-level machining functions, like 5-axis simultaneous control, tilted surface machining and tool edge point follow. With the PC-base system, outstanding performance and easy intuitive operation, the machine provides an optimum cost-to-performance ratio as you would expect.
Yimeng VT-350 compact vertical machining center
The Yimeng VT-350 compact vertical machining center is a rugged machine with a structure that presents outstanding stability in high speed machining. The VT-350 compact has an X-axis travel of 350mm, Y-axis travel of 250mm and a Z-axis travel of 300mm. The table size is 400mm x 250mm and the spindle speed is 12 000rpm and BT30 spindle taper. The maximum table load is 60 kilograms and it is supplied with a front-mounted 16-tool magazine.
The industries where the Yimeng VT-350 compact is used is in component machining, mould & die, automotive and motorcycle parts, 3C industries and the clocks and watches industry.
For further details contact Toolquip & Allied on TEL: 011 370 2727 or visit www.toolquip.co.za